# \#energy

**URL:** https://community.opal-rt.com/tag/energy/58.md

[Latest](https://community.opal-rt.com/latest.md) · [Categories](https://community.opal-rt.com/categories.md) · [Tags](https://community.opal-rt.com/tags.md)

---

## [Should I change my Power Amplifier?](https://community.opal-rt.com/t/should-i-change-my-power-amplifier/7616)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 1\
**Last updated:** [November 9, 2026, 2:31pm UTC](https://community.opal-rt.com/t/should-i-change-my-power-amplifier/7616 "2026-11-09T14:31:46Z")

</div>

I am using OP8110 to do the PV inverter PHIL testing. The PV inverter is SMA Sunny Tripower X25 and it is operated at 500W solar energy using Solar simulator. I used Hypersim to produce a phase jump 10, 20, 30 degrees an…

---

## [Error occurred with Hypersim](https://community.opal-rt.com/t/error-occurred-with-hypersim/7617)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 3\
**Last updated:** [November 7, 2026, 4:05am UTC](https://community.opal-rt.com/t/error-occurred-with-hypersim/7617 "2026-11-07T04:05:30Z")

</div>

I opened the hypersim and close my laptop (I did not turn off my laptop). Next day I opened my laptop, and entered the hypersim. When I pushed the run button, Hypersim showed the following message.

---

## [Why SPS is running so slow in simulation?](https://community.opal-rt.com/t/why-sps-is-running-so-slow-in-simulation/4531)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 4\
**Last updated:** [November 6, 2026, 4:55am UTC](https://community.opal-rt.com/t/why-sps-is-running-so-slow-in-simulation/4531 "2026-11-06T04:55:48Z")

</div>

Dear team, I am running a grid forming inverter using SPS software. I downloaded the Imperix files. I found the running time is so slow. Do you know the reason? Thank you

---

## [RT-LAB link error on OP5033XG2: DSS\_Utils.o and sfun\_spssw\_discc\_DSS.o not found (Discrete powergui, TBE)](https://community.opal-rt.com/t/rt-lab-link-error-on-op5033xg2-dss-utils-o-and-sfun-spssw-discc-dss-o-not-found-discrete-powergui-tbe/6414)

<div class="topic-metadata">

**Author:** [@SoftStone89](https://community.opal-rt.com/u/SoftStone89)\
**Replies:** 1\
**Last updated:** [November 4, 2026, 3:21pm UTC](https://community.opal-rt.com/t/rt-lab-link-error-on-op5033xg2-dss-utils-o-and-sfun-spssw-discc-dss-o-not-found-discrete-powergui-tbe/6414 "2026-11-04T15:21:35Z")

</div>

Hello, My model builds up to the link step on the target and then fails. Validation, separation, C code generation and transfer all pass. Setup Target: OP5033XG2 (OPT910818), OPAL-RTLinux 3.8.1, licence activated, 1 R…

---

## [Unexpected Comparator Output Showing Invalid/Garbage Values in ScopeView](https://community.opal-rt.com/t/unexpected-comparator-output-showing-invalid-garbage-values-in-scopeview/1374)

<div class="topic-metadata">

**Author:** [@RAVITEJA](https://community.opal-rt.com/u/RAVITEJA)\
**Replies:** 3\
**Last updated:** [October 23, 2026, 3:17pm UTC](https://community.opal-rt.com/t/unexpected-comparator-output-showing-invalid-garbage-values-in-scopeview/1374 "2026-10-23T15:17:23Z")

</div>

Hi Team, I am trying to use a simple Comparator with Multilevel Detection block, configured as shown in the attached screenshot: uL = 5.22 uH = 5.70 yL = 0 yM = 1 yH = 0 Based on this configuration, I expect the o…

---

## [getSimulationOverruns](https://community.opal-rt.com/t/getsimulationoverruns/1005)

<div class="topic-metadata">

**Author:** [@RAVITEJA](https://community.opal-rt.com/u/RAVITEJA)\
**Replies:** 5\
**Last updated:** [October 22, 2026, 7:38am UTC](https://community.opal-rt.com/t/getsimulationoverruns/1005 "2026-10-22T07:38:43Z")

</div>

Hi Team, I am trying to create an automation script in the Sequencer to print the overrun count after each simulation run. With the script below, I am encountering the error shown in the description. The error indicat…

---

## [UCM block Update](https://community.opal-rt.com/t/ucm-block-update/266)

<div class="topic-metadata">

**Author:** [@RAVITEJA](https://community.opal-rt.com/u/RAVITEJA)\
**Replies:** 2\
**Last updated:** [October 14, 2026, 8:58pm UTC](https://community.opal-rt.com/t/ucm-block-update/266 "2026-10-14T20:58:59Z")

</div>

am currently using a UCM block, and after every script modification, I follow the usual workflow: Generate Code → Update → Analyze However, during the Update step, I encounter the error shown below. At the same time, I…

---

## [Simulation has crashed or was freed manually](https://community.opal-rt.com/t/simulation-has-crashed-or-was-freed-manually/267)

<div class="topic-metadata">

**Author:** [@RAVITEJA](https://community.opal-rt.com/u/RAVITEJA)\
**Replies:** 1\
**Last updated:** [October 14, 2026, 6:46pm UTC](https://community.opal-rt.com/t/simulation-has-crashed-or-was-freed-manually/267 "2026-10-14T18:46:45Z")

</div>

Hi Team, I have developed an automation script using the Sequencer, and my model contains three UCM blocks. Before executing the automation through the Sequencer, I typically verify that the model runs smoothly and beh…

---

## [Query on Signal Conversion Between Control and Network Domains](https://community.opal-rt.com/t/query-on-signal-conversion-between-control-and-network-domains/251)

<div class="topic-metadata">

**Author:** [@RAVITEJA](https://community.opal-rt.com/u/RAVITEJA)\
**Replies:** 3\
**Last updated:** [October 13, 2026, 6:57pm UTC](https://community.opal-rt.com/t/query-on-signal-conversion-between-control-and-network-domains/251 "2026-10-13T18:57:42Z")

</div>

Hi Team, I have a couple of questions regarding signal generation and signal-domain conversion in HYPERSIM. Signal Conversion: Control Signal ↔ Network Signal I would like to know whether HYPERSIM provides a dedicated…

---

## [Can I use Matlab 2025b in RTlab?](https://community.opal-rt.com/t/can-i-use-matlab-2025b-in-rtlab/262)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 1\
**Last updated:** [October 13, 2026, 2:45am UTC](https://community.opal-rt.com/t/can-i-use-matlab-2025b-in-rtlab/262 "2026-10-13T02:45:52Z")

</div>

I have MATLAB 2025b, and can I use MATLAB 2025b for RT-LAB? MATLAB 2025b has SPS, but I have to key lib to find it.

---

## [When Should You Choose EMT Over RMS Simulation?](https://community.opal-rt.com/t/when-should-you-choose-emt-over-rms-simulation/136)

<div class="topic-metadata">

**Author:** [@francois.tempez](https://community.opal-rt.com/u/francois.tempez)\
**Replies:** 5\
**Last updated:** [October 8, 2026, 8:04am UTC](https://community.opal-rt.com/t/when-should-you-choose-emt-over-rms-simulation/136 "2026-10-08T08:04:05Z")

</div>

One topic that regularly comes up in discussions with utilities, OEMs, universities, and research institutes is the choice between EMT and RMS simulation. The distinction seems clear in theory, but in practice the bound…

---

## [About Power Amplifier SFP connection](https://community.opal-rt.com/t/about-power-amplifier-sfp-connection/196)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 5\
**Last updated:** [October 7, 2026, 12:25pm UTC](https://community.opal-rt.com/t/about-power-amplifier-sfp-connection/196 "2026-10-07T12:25:58Z")

</div>

The SFP 00, 01, and 02 of my OP5707XG are connected with OP8110 (3 units). If I have a new Power Amplifer, and I want to connect the new Power Amplifer to SFP, should I turn on another SFP (such as SFP 03) or can I use S…

---

## [How can I connect a physical microgrid controller with GHOST microgrid?](https://community.opal-rt.com/t/how-can-i-connect-a-physical-microgrid-controlloer-with-ghost-microgrid/211)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 9\
**Last updated:** [October 6, 2026, 1:42am UTC](https://community.opal-rt.com/t/how-can-i-connect-a-physical-microgrid-controlloer-with-ghost-microgrid/211 "2026-10-06T01:42:40Z")

</div>

Hi team, I am currently using GHOST microgrid to connect with a physical microgrid. Do you know what functions the microgrid controller should have? Thank you.

---

## [Inquiry regarding job opportunities and career guidance for engineers in Pakistan](https://community.opal-rt.com/t/inquiry-regarding-job-opportunities-and-career-guidance-for-engineers-in-pakistan/227)

<div class="topic-metadata">

**Author:** [@Jawadk2031](https://community.opal-rt.com/u/Jawadk2031)\
**Replies:** 2\
**Last updated:** [October 2, 2026, 3:16pm UTC](https://community.opal-rt.com/t/inquiry-regarding-job-opportunities-and-career-guidance-for-engineers-in-pakistan/227 "2026-10-02T15:16:13Z")

</div>

​Hello everyone, ​I am an engineer based in Pakistan, and I am looking for career guidance and job opportunities in the field of electrical systems, power engineering, and simulation technologies. ​Could anyone please …

---

## [Model Comparison (Diff) Capability in Hypersim](https://community.opal-rt.com/t/model-comparison-diff-capability-in-hypersim/157)

<div class="topic-metadata">

**Author:** [@RAVITEJA](https://community.opal-rt.com/u/RAVITEJA)\
**Replies:** 4\
**Last updated:** [October 1, 2026, 3:05am UTC](https://community.opal-rt.com/t/model-comparison-diff-capability-in-hypersim/157 "2026-10-01T03:05:54Z")

</div>

Hi Team, We currently maintain a baselined Hypersim model and continue developing new versions as the project progresses. I would like to know whether Hypersim provides a model comparison (Diff) capability similar to Si…

---

## [Can I connect PSIM with OPAL-RT](https://community.opal-rt.com/t/can-i-connect-psim-with-opal-rt/195)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 3\
**Last updated:** [October 1, 2026, 3:03am UTC](https://community.opal-rt.com/t/can-i-connect-psim-with-opal-rt/195 "2026-10-01T03:03:27Z")

</div>

Is it possible to connect PSIM (power electronics software) with OPAL-RT target?

---

## [Importing a 32-bit OEM model into HYPERSIM 2026](https://community.opal-rt.com/t/importing-a-32-bit-oem-model-into-hypersim-2026/221)

<div class="topic-metadata">

**Author:** [@Juan](https://community.opal-rt.com/u/Juan)\
**Replies:** 1\
**Last updated:** [October 1, 2026, 2:58am UTC](https://community.opal-rt.com/t/importing-a-32-bit-oem-model-into-hypersim-2026/221 "2026-10-01T02:58:46Z")

</div>

Hi, I have an OEM model compiled for a 32-bit (x86) architecture, but our OPAL-RT target uses a 64-bit (x64) architecture. Is there a way to import and run this model in HYPERSIM 2026, or does it need to be recompiled …

---

## [Flywheel incorporation with Centrifugal Break](https://community.opal-rt.com/t/flywheel-incorporation-with-centrifugal-break/213)

<div class="topic-metadata">

**Author:** [@research\_123](https://community.opal-rt.com/u/research_123)\
**Replies:** 1\
**Last updated:** [September 23, 2026, 7:25pm UTC](https://community.opal-rt.com/t/flywheel-incorporation-with-centrifugal-break/213 "2026-09-23T19:25:37Z")

</div>

For emergency escape device, I want to incorporate flywheel with centrifugal break. I want concept and tips for designing.

---

## [Where can I see the webinar archive of Hardware-in-the-Loop Validation for Data Center Power Infrastructure](https://community.opal-rt.com/t/where-can-i-see-the-webinar-archive-of-hardware-in-the-loop-validation-for-data-center-power-infrastructure/197)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 2\
**Last updated:** [September 21, 2026, 5:06am UTC](https://community.opal-rt.com/t/where-can-i-see-the-webinar-archive-of-hardware-in-the-loop-validation-for-data-center-power-infrastructure/197 "2026-09-21T05:06:32Z")

</div>

Where can I see the webinar archive? September 10 2026 Webinar:“Hardware-in-the-Loop Validation for Data Center Power Infrastructure”

---

## [Why halfline is required for FPGA and CPU cosimulation](https://community.opal-rt.com/t/why-halfline-is-required-for-fpga-and-cpu-cosimulation/193)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 2\
**Last updated:** [September 21, 2026, 4:58am UTC](https://community.opal-rt.com/t/why-halfline-is-required-for-fpga-and-cpu-cosimulation/193 "2026-09-21T04:58:53Z")

</div>

I am doing FPGA and CPU co-simulation in Hypersim. I do not know why halfline is required for FPGA and CPU co-simulation?

---

## [How can I increase the time step to 50us](https://community.opal-rt.com/t/how-can-i-increase-the-time-step-to-50us/194)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 2\
**Last updated:** [September 21, 2026, 4:31am UTC](https://community.opal-rt.com/t/how-can-i-increase-the-time-step-to-50us/194 "2026-09-21T04:31:18Z")

</div>

I am doing the simulaiton AC/DC and using PWM generator the switching frequency is 10kHz. If I set the time step at 50us, the simulated waveforms will be messy. So I need to decrease the time step to 1us, and the wavef…

---

## [Verbose mode decrease real-time performance](https://community.opal-rt.com/t/verbose-mode-decrease-real-time-performance/198)

<div class="topic-metadata">

**Author:** [@RAVITEJA](https://community.opal-rt.com/u/RAVITEJA)\
**Replies:** 3\
**Last updated:** [September 17, 2026, 5:18am UTC](https://community.opal-rt.com/t/verbose-mode-decrease-real-time-performance/198 "2026-09-17T05:18:39Z")

</div>

Hi Team, Every time,I run the simulation ,I see a warning message saying “verbose mesage decreases real-time performance!” I tried cleaning the code directory. still i see this issue. is there a permanent solution fo…

---

## [01\_axial\_pm\_generator\_v3\_corrected\_EN](https://community.opal-rt.com/t/01-axial-pm-generator-v3-corrected-en/199)

<div class="topic-metadata">

**Author:** [@SilverPanda86](https://community.opal-rt.com/u/SilverPanda86)\
**Replies:** 0\
**Last updated:** [September 15, 2026, 10:31pm UTC](https://community.opal-rt.com/t/01-axial-pm-generator-v3-corrected-en/199 "2026-09-15T22:31:19Z")

</div>

Would anyone like to verify the functionality of the energy source design in practice? Concept:

---

## [Can OP8110 Amplifier operate at "Current Source" mode?](https://community.opal-rt.com/t/can-op8110-amplifier-operate-at-current-source-mode/191)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 2\
**Last updated:** [September 9, 2026, 1:48am UTC](https://community.opal-rt.com/t/can-op8110-amplifier-operate-at-current-source-mode/191 "2026-09-09T01:48:00Z")

</div>

I am using the OPAL-RT platform to do inverter testing now. I connected a PV inverter (GFL) with OP8110 of the OPAL-RT platform. OP8110 (Power Amplifer )is operated in Voltage Source mode. If I want to connect GFM inv…

---

## [About Hypersim WT example](https://community.opal-rt.com/t/about-hypersim-wt-example/190)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 2\
**Last updated:** [September 9, 2026, 1:44am UTC](https://community.opal-rt.com/t/about-hypersim-wt-example/190 "2026-09-09T01:44:50Z")

</div>

I updated Hypersim to 2026.3, and I saw the WT components with GFM control in the smart inverter library. Are there any exmples of using WT components? And Will the Grid Forming Pv inverter have the components as well? …

---

## [HYPERSIM: Surge Arrester Block and Custom Library Creation](https://community.opal-rt.com/t/hypersim-surge-arrester-block-and-custom-library-creation/185)

<div class="topic-metadata">

**Author:** [@RAVITEJA](https://community.opal-rt.com/u/RAVITEJA)\
**Replies:** 2\
**Last updated:** [September 4, 2026, 2:44pm UTC](https://community.opal-rt.com/t/hypersim-surge-arrester-block-and-custom-library-creation/185 "2026-09-04T14:44:17Z")

</div>

Hi Team, I have a couple of questions regarding HYPERSIM: 1.I am looking for a Surge Arrester / Lightning Arrester block in HYPERSIM. Do we have a ready-to-use block available in the HYPERSIM library? I came across a S…

---

## [Using Agentic AI to do simulation](https://community.opal-rt.com/t/using-agentic-ai-to-do-simulation/176)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 1\
**Last updated:** [August 28, 2026, 1:30am UTC](https://community.opal-rt.com/t/using-agentic-ai-to-do-simulation/176 "2026-08-28T01:30:13Z")

</div>

Is it possible for Agentic AI to do OPAL-RT simulation?

---

## [SPS Software vs. Simscape Electrical: Choosing the Right Tool for Electrical System Simulation](https://community.opal-rt.com/t/sps-software-vs-simscape-electrical-choosing-the-right-tool-for-electrical-system-simulation/172)

<div class="topic-metadata">

**Author:** [@Mo.mansour](https://community.opal-rt.com/u/Mo.mansour)\
**Replies:** 0\
**Last updated:** [August 20, 2026, 8:26pm UTC](https://community.opal-rt.com/t/sps-software-vs-simscape-electrical-choosing-the-right-tool-for-electrical-system-simulation/172 "2026-08-20T20:26:19Z")

</div>

The evolution of electrical systems is driving increased demand for simulation tools that can accurately model complex networks while maintaining practical performance and scalability. As engineers work on renewable ener…

---

## [SPS: From Building Models to Real-Time Validation](https://community.opal-rt.com/t/sps-from-building-models-to-real-time-validation/171)

<div class="topic-metadata">

**Author:** [@Mo.mansour](https://community.opal-rt.com/u/Mo.mansour)\
**Replies:** 0\
**Last updated:** [August 19, 2026, 8:02pm UTC](https://community.opal-rt.com/t/sps-from-building-models-to-real-time-validation/171 "2026-08-19T20:02:22Z")

</div>

One of the strengths of SPS Software is that it supports engineers throughout the entire development cycle, from modeling and simulation to real-time and Hardware-in-the-Loop (HIL) testing. It starts with electrical mod…

---

## [CIGRE Interface application](https://community.opal-rt.com/t/cigre-interface-application/168)

<div class="topic-metadata">

**Author:** [@Vincent\_Jiang](https://community.opal-rt.com/u/Vincent_Jiang)\
**Replies:** 2\
**Last updated:** [August 19, 2026, 7:41am UTC](https://community.opal-rt.com/t/cigre-interface-application/168 "2026-08-19T07:41:52Z")

</div>

Does anyone know how to use CIGRE interface. I saw the CIGRE interface in hypersim

[Next page](https://community.opal-rt.com/tag/energy/58.md?match_all_tags=true&page=1&tags%5B%5D=energy)
