# \#fault

**URL:** https://community.opal-rt.com/tag/fault/120.md

[Latest](https://community.opal-rt.com/latest.md) · [Categories](https://community.opal-rt.com/categories.md) · [Tags](https://community.opal-rt.com/tags.md)

---

## [How to set a fault block in HYPERSIM](https://community.opal-rt.com/t/how-to-set-a-fault-block-in-hypersim/137)

<div class="topic-metadata">

**Author:** [@Thais\_Blasi](https://community.opal-rt.com/u/Thais_Blasi)\
**Replies:** 2\
**Last updated:** [August 3, 2026, 6:48pm UTC](https://community.opal-rt.com/t/how-to-set-a-fault-block-in-hypersim/137 "2026-08-03T18:48:16Z")

</div>

Here are some steps to help you to configure the fault block on your Hypersim model. Prerequisites It is strongly recommended to read the Fault Element Wiki page available at 3-Phase Fault Wiki Page Steps Step 1: Run…
